V8DualFuel: LPG / Autogas Conversions and kits

LPG / Autogas conversions and Kits from the experts


V8DualFuel from RPi Engineering: LPG / Autogas Conversions and kits for the Rover V8 Engine
Home   I   About LPG   I   LPG installation   I   LPG complete kits   I   LPG front end kits   I   LPG tanks   I   LPG Components   I   Contact
 
LPG Component categories

 

Magnecor plug wires 8.0mm Blue


Magnecor plug wires 8.0mm Blue

full set off 8.0mm Blue Magnecor Plug Leads, for 'all' Rover V8 Engines and engine variants fitted in very many different vehicles, but will always be delivered correct for your Rover V8 whatever your application. This listing also covers the Later 4.0 and 4.6 engine variants with rear mounted coils that have 8 coil leads in the set rather than one coil lead and 8 plug leads.

Fear not though, if your car has no adverse complications then we have Magnecor wires on the shelf ready to ship out to you the same day

We can also supply for USA V8's and many other petrol engine vehicles too, both 4wd & 2wd. Please enquire.

If you have a Discovery 2, or a 1999 to 2002 Range Rover:
Then its worth further noting that not only are the standard lucas plug wires of cheap design and an expensive price, they also take between 1.5 and 2.5 hours to comfortably install, (Uniquely the top end of the engine needs stripping to gain access to the coils at the rear of the injection system), Thus as a servicable item you could be paying well over £150.00 in labour alone, to change them each time, (The dealer - main agent undoubtedly will be very pleased to see you again :-)

Magnecor wires however are offered with a lifetime warranty that can be realistically interpreted as at least 5 to 10 years of great performance, we know this as we have sold over 2000 sets in the past 8 years and have had issues with less then 10 sets in total, this mostly due to bad installation or pulling them off by the wire rather than the spark plug or coil tower boot.

Magnecor design Origins.
In the beginning. Designed primarily for pure racing engines using racing ignitions, turbocharging and supercharging.

The Entire jacket was made from aerospace extreme heat-resistant silicone rubber.

Exclusive magnecor 2.5 mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely, allowing this cable to be used on all road vehicles with any ignition styles and especially essential for LPG gas converted vehicles..

Excellent RFI & EMI suppression, flexible high-strength, high-silicon construction
Please do not confuse Magnecor with cheaper high-street or original equipment leads. Spiral wound leads, hand built by Magnecor, actually boost spark output and plug gaps can safely be increased by 10-20% due substantial higher spark delivery voltage.

Magnecor Road & Race Wires (you dont need to read this)
Are used on most serious race engines such as current engines used in the USA in NASCAR, Winston Cup, Grand National and Super Truck series, SCCA (including successful factory vehicles and other series winners), IMSA, NHRA etc. Magnecor Race Wires are also used on many race engines competing worldwide; Australians would be interested to know most successful Touring Cars, including most cars running at Bathurst, use Magnecor Race Wires. They have been successfully run on many 5,000+HP Top Fuel engines. However, unlike all other performance wires, Magnecor Race Wires can be used to improve ANY street engine ignition performance ­ because they provide EMI suppression!

OK. so that's the info Now for the down-to-earth, in-house, real-time stuff.
Having supplied and utilized over 2000 sets ourselves over the past years, we know your V8 will truly suffer if you don't upgrade, as will economy power and efficiency. Don't let such a minor product with major implications destroy the potential you have striven for.

The small print.
Please note that the auction is for one set of Magnecor 8.0mm leads (Blue), for whatever your V8 Rover Type. Please then don't Forget upon winning the auction you must tell us what you std car, or variant is. For most other vehicle applications (not listed) we can easily have them custom made direct from our supplier, however, this usually takes an extra few days on the delivery time and can vary the actual price.

We can supply Magnecor high specification plug wires for almost all petrol engines, please enquire

To purchase this item click here to visit our Ebay shop