Sequential Injected System: 6 Cylinder
What's the system suitable for?
This Romano injected LPG system should be suitable for any 8 cylinder fuel injected engine.
We specifically use this front end conversion kit on the Motronic (Thor) Rover V8 as found on the post 2000 P38 Range Rovers 4.0, 4.6 litre and also the Series II Discovery 4.0 litre.
The Romano Sequential Injection LPG front end kit suitable for Rover V8’s with Fuel injection engine. Although we only use these kits on the later Motronic (Thor) Rover V8’s it will also work on the earlier Sagem (Gem’s) and Lucas 14CUX (Hotwire) Fuel Injection systems
Please note that it is a requirement of all LPG systems as supplied by Partsrange (RPi Engineering) that once fitted, the installation shoud be checked over, set up and certified by RPi or by an LPG certified fitter.
Please check with us if you are unsure if this system is suitable for your vehicle.
Once fitted the LPG switch has three operating modes which are changed between by a simple push button.
This switch also has a gauge in the form of 1 Red LED and several Green ones that indicates the level of LPG in the tank.
LPG Engine Components
This front end system comprises of every LPG component needed under the bonnet to convert your vehicle to LPG and includes.